• Innovator with golden glow
• Foundry industry – Significance and future challenges
• Forty anniversary of course Polymer Processing at the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
• 55th international fair of technique and technical achievements
• Easier and faster control of geometrical tolerances (GD&T)
• Expert quadruple fair in Celje with positive evaluation of visitors and exhibitors
• Slump of demands for robots in 2009. year and again recovery in the year 2010.
• News at Technology Days in Arburg
• Life cycle planning
Marko Kravar, company Termist d.o.o. from Zagreb Innovator with golden glow
Marko Kravar, company Termist d.o.o. from Zagreb
International economic forum »Monetary policy in the process of Republic of Croatia entry into European Union«
Visit to fair LASER World Photonics and technical museum in München
Big hope of domestic economy
Forty anniversary of course Polymer Processing at the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb
Transformation of mainly organic polymers, plastics, rubber, but even wood, into the useful products in syllabuses at the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, has a special place not only in Croatia but considerably wider. One of the reasons is the fact, that there were lectures about production of thermoset products already in the year 1936. From that time derives a beginning of lectures from area of wood and its processing. The course dedicated to learning of the students from one faculty with area of plastics and rubber processing before forty years was rarely even at the world scale. This year is a 40th anniversary of the first registered students at the studies of mechanical engineering at the Faculty of Mechanical Engineering and Naval Architecture, which attended then coarse of Polymer Processing (wood, plastics and rubber) in 7th semester, the first of that kind in the area of former country, and according to available information, the third in Europe.
Foundry industry – Significance and future challenges
From 28th to 29th April 2011. year in Opatija was held 11st international conference of foundry industry. Conference was held at the conference hall Mimoza that belongs to the hotel complex Grand Hotel 4 Opatian flowers. The organizers of this prestige foundry conference were: Metalurški fakultet Sisak, Rio Tinto Iron & Titanium GmbH (Eschborn, Germany), Metalska industrija Varaždin d.d., Elkem AS (Oslo, Norway) and Pro Ferrum GmbH (Rijeka). Moreover, the organization was realised with support of Ministry of science, education and sports, of the Republic of Croatia, Academy of technical science of Republic of Croatia, town Sisak, Croatian chamber of commerce, Sisačko-moslovačka county, Mittel Europäische Giesserei Initiative and University of Zagreb. Around 250 participants from 14 countries were participating at the foundry conference. Participants presented 47 scientific-expert papers, from which 24 oral and 23 in poster section.
Đuro Đaković will build reservoirs for Janaf
Croatia the only country of the »new Europe« without growth of GDP
Conference Role of polymer industry in stimulation of economic growth
Suggestion of Strategy of entrepreneurship development in Zagreb till the year 2020.
Expert quadruple fair in Celje with positive evaluation of visitors and exhibitors
Four expert biennale fairs, Forma tool, Plagkem, Graf&Pack and Livarstvo, that were held during four days in Celje, have visited almost 11 000 visitors. At the fairs organizer, company Celjski sejem d.d., explain that they exceed results from the year 2009., when the fairs were held last time. The result of fair visit confirms positive grades of the events which were collected from exhibitors and visitors. Among them there were many foreigners, mainly from the South Balkan countries (Bosnia and Herzegovina, Croatia and Serbia) and from European Union (Austria, Czech Republic, France, Italy and Germany). In Celjski sejem d.d. with satisfaction are analyzed results of survey they carried out among exhibitors and visitors because almost all exhibitors were marked as successful or very successful. It was reflected in their answers on question about fulfilled expectations from the fair event.
Thoroughly record without respite
Easier and faster control of geometrical tolerances (GD&T)
Geometrical tolerances (tolerances of shape and length - GD&T) are despite the fact, that are closer to the list of real functionality of the product than classic tolerances, (the last can be considered as special geometrical tolerances), still considered to be a complex. With aid of 3D-measuring and with leading optical systems for 3D-digitalisation, a large step forward was made in control of mentioned deviations.
Faster and better drilling the holes into the composite materials
The power of LASER World of PHOTONICS 2011
Deep drilling in tool-making
AUDI AG maintain high quality standards with infrared thermography
From the world
55th international fair of technique and technical achievements Public agency of Republic of Serbia for entrepreneur and foreign investments (JAPTI) and Slovenian craft chamber (OZS) were organised mutual appearance for Slovenian companies at 55th international fair of technique and technical achievements at the Belgrade fair. The fair was held between 9th and 13th May 2011. International fair of technique and technical achievements was organised for the first time in the year 1937., and after 20 years it has got international confirmation by receiving into International fairs association UFI. This year around 700 exhibitors from 28 countries were presented. They represents modern technological and technical achievements on different areas, such as automation, robotics, wireless communication, electro-energetic, electronics, lighting, mechanical engineering, air condition devices. The visitors could see 170 technological news.
New laser sensor for special applications
Slump of demands for robots in 2009. year and again recovery in the year 2010.
World economy and financial crisis are in the year 2009. caused slump of selling of industrial robots. In comparison with the year 2008., that was from the selling pint of view one of the best, in the year 2009. the selling was reduced for even 47 %. According to the data from Statistical office of international organisation for robotics IFR, 60 000 sold robots meant the weakest selling of industrial robots since the year 1994. This office every year, in their report, publishes a data about the situation of the robotics in the world.
Logistical services outsourcing - 3PL
Omron's system of machine vision in color
Injection moulding of metal moulded parts with Catamold material
New air valves
News at Technology Days in Arburg
From 23rd to 26th March 2011. almost 5 000 visitors from all over the world have arrived in the small place Lossburg at the traditional Technology Days of Arburg company. The company every year prepares many diverse examples from the industry of injection moulding of polymers, whit which they want to inform their clients and the equipment and solutions potential buyers. In the new facilities were installed even 40 machines with examples of different application from classic injection moulding of thermoplastics and thermosets, to multi-component xK processes, injection moulding of liquid silicone rubber, IML, MIM, etc.
Production and logistic
Metronik successfully automatized new Krka plant
Atlas WMS with certificate of Fraunhofer Institute
Life cycle planning
Detail analysis of product life cycle enable their designing in the way that they are as less as possible harmful for the environment during their production and application and at the end also during recycling. Beside it is possible with modernisation prolong or shorten the lifetime of the machines and factories, in order to be able to reduce the damage for the environment. Sophisticated analysis leads to the more efficient new technologies. The times were changed, and today is more than ever before important to look far ahead in finance and business, but also regarding effects of our actions, or absence of actions, on the environment and climate. Environment protection and economic growth are not excluding each other.
Arburg's anniversary: 50 years of Allrounder
Lego & Arburg hand-by-hand
Wittmann Battenfeld presented new AQUAMOULD equipment
Challenges of ICT industry in Croatia
Vipnet takeovers B.net for 93 mil. euro
SAP and Microsoft published mutual partnership program and program equipment Duet Enterprise
List of advertisers in 15. number of IRT3000Adria
List of advertisers in 15. number of IRT3000
|3-WAY, Tomaž Vujasinovic s.p. |
ABB, d. o. o.
BTS, d. o. o.
BTS KOTHENNYA, d. o. o.
Cajhen, d. o. o.
Camincam, d. o. o.
Celjski sejem, d. o. o.
Društvo ljevača Slovenije
Halder, d. o. o.
HSTEC, d. o. o.
Industrijski forum IRT 2011
ICM, d. o. o.
iTCR, d. o. o.
|KLEX, d. o. o. |
KMS, d. o. o.
Montanwerke Walter Werkzeug GmbH
Motoman Robotec, d.o.o.
NOMIS, d. o. o.
Rappold Winterthur brusilna tehnika, d. o. o.
Sandvik, d. o. o.
TBW, d. o. o.
Teximp, d. o. o.
TOPOMATIKA, d. o. o.
TM, d. o. o.